Publications

You can find our publications on our research portal Pure

2020

Jiehua Li*, Jun Li, Oliver Renk, Reinhard Pippan, Pradipta Ghosh*. Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution during Rolling of Directionally Solidified Ag-Cu Eutectic Alloy. Metallurgical and Materials Transactions A. 2020, 51: 368-379.

J. Zhang, C. Hu, Y. Zhang, Jiehua Li, C. Song, Q. Zhai. Microstructures, mechanical properties and deformation of near-rapidly solidified low-density Fe-20Mn-9Al-1.2C-xCr steels. Materials & Design. 2020, 186: 108307: 1-13.

Xuejian Wang, Zongning Chen, Jing Ren, Huijun Kang, Enyu Guo*, Jiehua Li, Tongmin Wang*. Corrosion behavior of as-cast Mg-5Sn based alloys with In additions in 3.5 wt% NaCl solution. Corrosion Science. 2020, 164: 108318.

2019

Jiehua Li*, Z.H. An, F.S. Hage, H.Y. Wang, P. Xie, S.B. Jin, Q. Ramasse, G. Sha*. Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy. Materials Science and Engineering A 2019, 760: 366-376.

Maja Von?ina*, Jožef Medved, Stanislav Kores, Pan Xia, Peter Schumacher, Jiehua Li*. Precipitation microstructure in Al-Si-Mg-Mn alloy with Zr additions. Materials Characterization. 2019, 155: 109820 

J. Barrirero, M. Engstler, C. Pauly, J. Ghanbaja, N. Ghafoor, Jiehua Li, P. Schumacher, M. Odén, F. Mücklich*. Eutectic modification by ternary compound cluster formation in Al-Si alloys. Scientific reports 2019, 9:5506 doi.org/10.1038/s41598-019-41919-2

L. Yang, Z.N. Zhou, S.T. Feng, Jiehua Li, J. Liu, J. Li*, Q.D. Hu*, J.G. Li. Microstructure and magnetic property of LaFe11.6Si1.4 magnetocaloric alloys by a novel short time heat treatment. Intermetallics. 2019, 105: 1-5.

J. Xue, S.B. Jin*, X.H. An, X.Z. Liao, Jiehua Li, G. Sha*. Understanding formation of Mg-depletion zones in Al-Mg alloys under high pressure torsion. Journal of Materials Science & Technology. 2019, 35: 858-864.

O. Renk*, V. Maier-Kiener, I. Issa, Jiehua Li, D. Kiener, P. Pippan. Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation. Acta Mater. 2019, 165: 409-419.

L. Xiao, G.Y. Yang*, J.M. Chen, S.F. Luo, Jiehua Li, W.Q. Jie. Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy. Materials Science and Engineering A 2019, 744: 277-289.

Li, J., Ludwig, T., Oberdorfer, B., Schumacher, P.: Solidification behaviour of Al-Si based alloys with controlled additions of Eu and P. International Journal of Cast Metals Research, 31, 319-331.

Zhu, J., Zhou, T., Zha, M., Li, C., Li, J., Wang, C., Gao, C., Wang, H., Jiang, Q.: Microstructure and wear behaviour of Al-20Mg2Si alloy with combined Zr and Sb additions. Journal of Alloys and Compounds, 767, 1109-1116.

Zhang, C., Wang, H., Zha, M., Wang, C., Li, J., Yang, Z., Jiang, Q.: Microstructure and tensile properties of AZ61 alloy sheets processed by high-ratio extrusion with subsequent direct aging treatment. Materials, 11, 895.

Li, J., Oberdorfer, B., Habe, D., Schumacher, P.: Determining casting defects in near-net shape casting aluminium parts by computed tomography. Front. Mech. Eng., 13, 48-52.

Wang, H., Zhu, J., Li, J., Li, C., Zha, Min, Wang, C., Yang, Z., Jiang, Q.: Refinement and modification of primary Mg2Si in Al-20Mg2Si alloy by a combined addition of yttrium and antimony. CrystEngComm., 19, 6365-6372.  

Xing, Y., Jia, Z., Li, J., Ding, L., Huang, H., Liu, Q.: Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy. Materials Science and Engineering A., 684, 90-100.

Schuh, B., Voelker, B., Todt, J., Schell, N., Perriere, L., Li, J., Couzinie, J., Hohenwarter A.: Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties. Acta Mater, 142, 201-212.

Paris, O., Lang, D., Li, J., Schumacher. P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Fritz-Popovski, G., Ganser, C., Teichert, C., Clemens, H.: Complementary high spatial resolution methods in materials science and engineering. Advanced Engineering Materials, 19, 1600671.

Schuh, B., Völker, B., Maier-Kiener, V., Todt, J., Li, J., Hohenwarter A.: Phase decomposition of a single-phase AlTiVNb high-entropy alloy after severe plastic deformation and annealing. Advanced Engineering Materials., 19, 1600674.

Liu, J., Li, J., Hage, F., Ghosh, P., Li, J., Wang, W., Tang, W., Ramasse, Q., Schumacher, P.: Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure. Acta materialia, 131, 169-186.

Han, W., Yang, G., Xiao, L., Li, J., Jie, W.: Creep properties and creep microstructure evolution of Mg-2.49Nd-1.82Gd-0.19Zn-0.4Zr alloy. Materials science and engineering A (Structural materials: properties, microstructure and processing), 684, 90-100.

Li, J., Wang, L., Zhong, X., Xia, M., Haigh, S., Schumacher, P.: Cu segregation on the interface between Al2O3 substrate and Al-1.4Cu alloy. Materials characterization, 129, 300-304.

Liu, J., Tang, W., Li, J.: Deformation and fracture behaviors of K403 Ni-based superalloy at elevated temperatures. Journal of alloys and compounds, 699, 581-590.

Li, J., Hage, F., Zhong, X., Wu, Y., Peng, L., Haigh, S., Ramasse, Q. Schumacher, P.: Elemental distribution within the long-period stacking ordered structure in a Mg-Gd-Zn-Mn alloy. Materials characterization, 129, 247-251.

Stauder, B., Kerber, H., Schumacher, P.: Foundry sand core property assessment by 3-point bending test evaluation. Livarski vestnik, 66-90.

Li, J., Yang, G., Hage, F., Chen, Z., Wang, T., Ramasse, Q., Schumacher, P.: Heterogeneous nucleation of Al onAlB2 in Al-7Si alloy. Materials characterization, 128, 7-13.

Schumacher, P.: Montanuniversität Leoben - Lehrstuhl für Gießereikunde. Jahresmagazin Ingenieurwissenschaften im Fokus: akaGuss – Gießereitechnik, 74-79.

Li, J., Albu, M., Wu, Y. J., Peng, L. M., Dienstleder, M., Kothleitner, G., Hofer, F., Schumacher, P.: Precipitation of long-period stacking ordered structure in Mg-Gd-Zn-Mn alloy. Advanced engineering materials, 19(1600705). DOI: 10.1002/adem.201600705

Chen, Y., Zhang, Z., Chen, Z., Tsalanidis, A., Weyland, M., Findlay, S., Allen, L., Li, J., Medhekar, V., Bourgeois, L.: The enhanced theta-prime (q0) precipitation in an Al-Cu alloy with trace Au additions. Acta materialia, 125, 340-350.

Cziegler, A., Schumacher, P.: Investigation of the correlation between growth restriction and grain size in Cu alloys. International journal of cast metals research, 30(4), 251-255.

Cziegler, A., Schumacher, P.: Influence of solute content on grain size in binary Cu alloys. in Proceedings of the MultiScience-XXXI. microCAD International Multidisciplinary Scientific Conference

Cziegler, A., Schumacher, P.: Kornfeinung in Kupferlegierungen - Untersuchung der wachstumsbehindernden Wirkung einzelner Legierungselemente. Abstract von German Foundry Days, Düsseldorf, Deutschland.

Voncina, M., Medved, J., Kores, S., Xie, P., Cziegler, A., Schumacher, P.: Effect of molybdenum and zirconium on aluminium casting alloys. 63. Abstract von 57th International Foundry Conference Portoroz 2017, Portoroz, Slowenien.

Petkov, T., Schröttner, H., Albu, M., Rossmann-Perner, A., Schumacher, P.: Effect of trace elements on microstructure and material properties of an aluminium alloy. Postersitzung präsentiert bei 57th International Foundry Conference Portoroz 2017, Portoroz, Slowenien.

Cziegler, A., Schumacher, P.: Kornfeinung von Kupferlegierungen - Eine Erststudie. Gießerei-Rundschau (Giessereirundschau), 64(04), 32-38.

Cziegler, A., Pabel, T., Habe, D., Schumacher, P.: Ultraschallbehandlung von Aluminiumschmelzen: Untersuchung des Effekts einer künstlichen Aufgasung nach einer US-Behandlung. Gießerei-Rundschau (Giessereirundschau), 64(04), 25-31.

Cziegler, A., Geraseva, O., Schumacher, P.: Numerical and Experimental Investigation of the Influence of Growth Restriction on Grain Size in Binary Cu Alloys. Metals, 7(9).

Wang, Z., Li, C., Wang, H., Zhu, X., Wu, M., Li, J., Jiang, Q.: Aging Behavior of Nano-SiC/2014Al Composite Fabricated by Powder Metallurgy and Hot Extrusion Techniques. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 32 (10), 1008.

Barrirero, J., Li, J., Engstler, M., Ghafoor, N., Schumacher, P., Odén, M., Mücklich, F.: Cluster formation at the Si / liquid interface in Sr and Na modified Al-Si alloys. Scripta materialia, 117, 13-16.

Liu, J., Tang, W., Li, J.: Deformation and fracture behaviors of K403 Ni-based superalloy at elevated temperatures. Journal of alloys and compounds.

Heugenhauser, S., Kaschnitz, E., Mittler, T., Pintore, M., Schumacher, P.: Development and numerical simulation of a compound belt casting process. in Proceedings, TMS 2016, Nashville, USA

Li, J., Wanderka, N., Balogh, Z., Stender, P., Kropf, H., Albu, M., Tsunekawa, Y., Hofer, F., Schmitz, G., Schumacher, P.: Effects of trace elements (Y and Ca) on the eutectic Ge in Al–Ge based alloys. Acta materialia, 111, 85-95.

Staggl, S., Bozorgi, S., Kretz, R., Schumacher, P.: Energieeffiziente Wärmebehandlung der Gusslegierungen AlSi7Mg0,3 und AlSi9Cu3(Fe). Berg- und hüttenmännische Monatshefte : BHM.

Yu, W., Hao, Q., Fan, L., Li, J.: Eutectic solidification microstructure of an Al-4Ni-2Mn alloy. Journal of alloys and compounds, 688, 798-803.

Chen, Z., Kang, H., Fan, G., Li, J., Lu, Y., Jie, J., Zhang, Y., Li, T., Jian, X., Wang, T.: Grain refinement of hypoeutectic Al-Si alloys with B. Acta materialia, 120, 168.

Li, J., Hage, F., Ramasse, Q., Schumacher, P.:Investigation of heterogeneous nucleation interface of TiB2 in Al alloys by atomic STEM-HAADF and EELS. 15th International Conference on Aluminum Alloys (ICAA15), Chongqing, China.

Luo, S., Yang, G., Liu, S., Wang, J., Li, J., Jie, W.: Microstructure Evolution and Mechanical Properties of directionally solidified Mg-xGd (x¼0.8, 1.5,and2.5)alloys. Materials science and engineering A (Structural materials: properties, microstructure and processing ), 662, 241-250.

Schuh, B., Völker, B., Li, J., Maier, V., Pippan, R., Hohenwarter, A.: Microstructure and mechanical properties of a nanocrystalline AlNbTiV high-entropy alloy. 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), Kyoto, Japan.

Kerber, H., Riegler, M., Schindelbacher, G., Schumacher, P.: New Possibilities with Improved Green Sand Testing Facilities. Livarski vestnik, 1, 2-14.

Li, J., Barrirero, J., Sha, G., Aboulfadl, H., Mücklich, F., Schumacher, P.: Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy. Acta materialia, 108, 207-218.

Li, J., Hage, F. S., Liu, X., Ramasse, Q., Schumacher, P.: Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys. Scientific reports (London : Nature Publishing Group), 6.

Bourgeois, L., Zhang, Z., Li, J., Medhekar, N.: The bulk and interfacial structures of the (Al2Au) precipitate phase. Acta materialia, 105, 284-293.

Pabel, T., Petkov, T., Habe, D., Schumacher, P.: Ultrasound degassing and computed tomography quality control. Postersitzung präsentiert bei 19th World Conference on Non-Destructive Testing 2016, München, Deutschland.

Pabel, T., Petkov, T., Habe, D., Schumacher, P.: Ultrasound degassing and computed tomography quality control. in Conference Proceedings: 19th World Conference on Non-Destructive Testing

Hofer, P., Gössl, W., Tucan, K-P., Schindelbacher, G., Schumacher, P.: Wolfram-Verbundwerkstoffe als Formenmaterial im Druckguss. Gießerei (Giesserei), 76-83.

Pabel, T., Kneißl, C., Petkov, T., Schumacher, P.: Effect of trace elements on material properties of an aluminium casting alloy. Postersitzung präsentiert bei TMS 2016 145th Annual Meeting & Exhibition, Nashville, Tennessee, USA / Vereinigte Staaten.

Li, J., Schumacher, P.: Simultaneously refining eutectic grain and modifying eutectic Si in Al-10Si-0.3Mg alloys by Sr and CrB2 additions. TMS 2016 145th Annual Meeting & Exhibition, Nashville, Tennessee, USA / Vereinigte Staaten.

Schumacher, P., Li, J.: Atomistic Experimental and Simulation Investigation on the Modification of Al-Si alloys. TMS 2016 145th Annual Meeting & Exhibition, Nashville, Tennessee, USA / Vereinigte Staaten.

Li, J., Hage, F., Romaner, L., Scheiber, D., Ramasse, Q., Schumacher, P.: Atomistic Experimental and Simulation Investigation on the Modification of Al-Si alloys. in Frontiers in solidification: Materials Processing & Manufacturing Division (MPMD) Symposium in Honor of Michel Rappaz

Schumacher, P., Li, J.: Modification of eutectic Si and refinement of eutectic grain in Al-Si-Mag alloys by CrB2 and Sr addition. TMS 2016 145th Annual Meeting & Exhibition, Nashville, Tennessee, USA / Vereinigte Staaten.

Li, J., Schumacher, P.: Modification of eutectic Si and refinement of eutectic grain in Al-Si-Mag alloys by CrB2 and Sr addition. in Light Metals 2016

Cziegler, A., Schumacher, P.: Preliminary Investigation of the Grain Refinement Mechanism in Cu Alloys. in M. Tiryakio?lu, M. Jolly, & G. Byczynski (Hrsg.), Shape Casting: 6th International Symposium, TMS 2016 145th Annual Meeting & Exhibition (S. 159-166). John Wiley & Sons, Inc.

Schumacher, P.: Montanuniversität Leoben - Kompetenz durch Kooperation. Gießerei (Giesserei), 4, 30-33.

Pabel, T., Kneißl, C., Petkov, T., Schumacher, P.: Einfluss von Spurenelementen auf das Eigenschaftspotential einer Aluminium-Gusslegierung. Postersitzung präsentiert bei 60. Österreichische Gießereitagung, Bad Ischl, Österreich.

Schumacher, P.: Mikrogefüge von Al-Si Legierungen: Kornfeinung und Porenbildung. Verein Deutscher Giessereifachleute, Magdeburg, Deutschland.

Schumacher, P.: High resolution observation of solidification interfaces in Al-Si alloys. Universität Saarbrücken, Deutschland.

Li, J.: Atomistic experimental and simulation investigation on the modification of Al-Si alloys. THERMEC 2016, Graz, Österreich.

Schumacher, P.: Aluminium Solidification Fundamentals. TMS Aluminium Cast Shop Science and Technology, Hamburg, Deutschland.

Schumacher, P.: As Cast Microstructure. TMS Aluminium Cast Shop Science and Technology, Hamburg, Deutschland.

Schumacher, P.: Grain Refinement Theory. TMS Aluminium Cast Shop Science and Technology, Hamburg, Deutschland.

Bourgeois, L., Zhang, Z., Li, J., Medhekar, N.: The atomic structures of the Al2Au precipitate phase in aluminium. 15th International Conference on Aluminum Alloys (ICAA15), Chongqing, China.

Li, J., Hage, F. S., Ramasse, Q., Schumacher, P.: Eu Modification of Al-Si Alloys Studied at the Atomic Scale. Postersitzung präsentiert bei SCANDEM 2016, Trondheim, Norwegen.

Cziegler, A., Pabel, T., Habe, D., Schumacher, P.: Evaluation of the effect of artificial re-gassing of aluminium melts after ultrasonic treatment. International journal of cast metals research, 30(1), 30-33.

Petkov, T., Berbic, M., Pabel, T., Kneißl, C., Schumacher, P.: Grundlegende und neuartige Untersuchungen an übereutektischen AlSi-Gusslegierungen. Werkstoffe in der Fertigung, (4), 22-24.

Schumacher, P.: Chair of Casting Research: Fundamentally orientated solidification research.

Schumacher, P., Li, J.: High resolution observation of solidification interface in Al-Si alloys. 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), Kyoto, Japan.

Chen, Y., Zhang, Z., Chen, Z., Tsalanidis, A., Weyland, M., Findlay, S., Allen, L., Li, j., Bourgeois, L., Medhekar, N.: On the influence of the elemental addition Au on the semi-coherent interfaces in an Al-Cu alloy. The 16th European Microscopy Congress, Lyon, Frankreich.

Li, J., Hage, F., Ramasse, Q., Schumacher, P.: Probing heterogeneous nucleation interface of TiB2 in Al alloys. The 16th European Microscopy Congress, Lyon, Frankreich.

Li, J., Hage, F., Ramasse, Q., Schumacher, P.: Probing heterogeneous nucleation interface of TiB2 in Al alloys by atomic STEM-HAADF and EELS. 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), Kyoto, Japan.

Bourgeois, L., Zhang, Z., Zhang, Y., Chen, Y., Rosalie, J., Li, J., Dwyer, C., Medhekar, N.: The role of interfacial structure and defects in precipitation pathways in Aluminium alloys. The 16th European Microscopy Congress, Lyon, Frankreich.

Li, J., Wiessner, M., Albu, M., Wurster, S., Sartory, B., Hofer, F., Schumacher, P.: Correlative characterization of primary Al3 (Sc,Zr) phase in an Al-Zn-Mg based alloy. Materials characterization, 102, 62-70.

Krajewski, W. K., Buras, J., Krajewski, P. K., Greer, A. L., Faerber, K., Schumacher, P.: New developments of Al-Zn cast alloys. Abstract von Elsevier, Österreich.

Li, J. H., Yang, Y. G., Soemmez, S., Taylor, J. A., Oberdorfer, B., Habe, D., Heugenhauser, S., Schumacher, P. : Simultaneously refining eutectic grain and modifying eutectic Si in Al-10Si-0.3Mg alloys by Sr and CrB2 additions.

International journal of cast metals research, 29(3), 158-173. DOI: dx.doi.org/10.1080/13640461.2015.1121340, 10.1080/13640461.2015.1121340

Li, J. H., Wang, X. D., Ludwig, T. H., Tsunekawa, Y., Arnberg, L., Jiang, J. Z., Schumacher, P.: Modification of eutectic Si in Al-Si alloys with Eu addition. Acta materialia, 84, 153-163. DOI: 10.1016/j.actamat.2014.10.064

Heugenhauser, S., Kaschnitz, E., Langbein, F., Schumacher, P.: Numerische Simulation und praktische Versuche zum Verbundgießen von Aluminiumlegerungen. Gießerei (Giesserei), 3, 40-47.

Schumacher, P.: Key roles of impurities during solidification in Al alloys. TMS 2015 144th Annual Meeting & Exhibition, Orlando, USA / Vereinigte Staaten.

Li, J. H., Albu, M., Hofer, F., Schumacher, P.: Einfluss von Spurenelementen auf die Veredelung und die Größe von eutektischen Körnern in Al-Si Legierungen. Aachener Gießerei-Kolloquium, .

Schumacher, P.: Al solidification fundamentals, Grain refinement theory. TMS Aluminium Cast Shop Science and Technology, Evensville, USA / Vereinigte Staaten.

Tucan, K-P., Hofer, P., Schindelbacher, G., Schumacher, P., Gschwandtner, R.: Potenziale von Standard-Druckgusslegierungen. Gießerei (Giesserei), 6, 52-64.

Schumacher, P.: Sustainable Technology of Metal Materials. University of Maribor, .

Cziegler, A.: Aspects of grain refinement in copper alloys. Postersitzung präsentiert bei GIFA, Düsseldorf, Deutschland.

Kaschnitz, E., Heugenhauser, S., Schumacher, P.: A benchmark for the validation of solidification modelling algorithms. IOP Conference Series: Materials Science and Engineering.

Bacquart, T., Li, J., Ribeiro Guevara, S., Arribere, M. A., Gerganova, T., Sterckx, M., Schumacher, P., Linsinger, T. P. J.: A novel route to produce a homogeneous certified reference material for k0-neutron activation analysis: Application to the certification of gold mass fraction in an Al-0.1 % Au alloy. Microchemical journal, (124), 159.

Tucan, K-P., Hofer, P., Schumacher, P.: Aspects of modern production methods of integrated high pressure die castings. 55th International founry conference Portoroz 2015, Portoroz, Slowenien.

Li, J., Hage, F., Wiessner, M., Romaner, L., Scheiber, D., Sartory, B., Ramasse, Q., Schumacher, P.: The roles of Eu during the growth of eutectic Si in Al-Si alloys. Scientific reports (London : Nature Publishing Group), 5(13802 ), 1-10. [Scientific Reports | 5:13802 | DOI: 10.1038/srep13802]. DOI: 10.1038/srep13802

Schumacher, P., Li, J.: Atomistic characaterization on the solute clustering and precipitation of Mg alloys. Euromat 2015, Warsaw, Polen.

Schumacher, P.: Festschrift zum Jubiläum 175 Jahre Montanuniversität Leoben, 2015: Lehrstuhl für Giessereikunde. in Die Entwicklung der Montanuniversität Leoben seit 1990: 175 Jahre (Band 1, S. 164-167). Montanuniversität Leoben.

Li, J.; Wimmer, A. C.; Dehm, G.; Schumacher, P.: 
Intermetallic phase selection during homogenisation for AA6082 alloy. - in: Philosophical magazine (2014) , S. 830 - 846

Li, J.; Albu, M.; Ludwig, T. H.; Matsubara, Y.; Arnberg, L.; Tsunekawa, Y.; Schumacher, P.: 
Modification of eutectic Si in Al-Si based alloys. - in: Materials science forum 794-796 (2014) , S. 130 - 136

Li, J.; Zarif, M.; Albu, M.; McKay, B.; Hofer, F.; Schumacher, P.: 
Nucleation Kinetics of Entrained Eutectic Si in Al-5Si Alloys. - in: Acta materialia (2014) 72, S. 80 - 98

Ludwig, T.; Li, J.; Schaffer, P.; Schumacher, P.; Arnberg, L.: 
Refinement of eutectic Si in high purity Al-5Si alloys with combined Ca and P additions . - in: Metallurgical and materials transactions A (2014) In Press

Li, J.; Wurster, S.; Oberdorfer, B.: 
Impurity effects on the nucleation and growth of primary Al³(Sc,Zr) phase in Al alloys. - in: Journal of materials science (2014) , S. 5961 - 5977

Petkov, T.; Künstner, D.; Pabel, T.; Faerber, K.; Kneißl, C.; Schumacher, P.: 
Optimierung der Wärmebehandlungsparameter für eine AlMgSi-Gusslegierung. - in: Metall (2014) 4, S. 148 - 154

Heugenhauser, S.; Kaschnitz, E.; Langbein, F.; Schumacher, P.: 
Numerische Simulation und praktische Versuche zum Verbundgießen von Aluminiumlegierungen. - in: Gießerei-Rundschau (Giessereirundschau) (2014) In Press

Hofer, P.; Kaschnitz, E.; Schumacher, P.: 
Distortion and Residual Stress in High-Pressure Die Castings: Simulation and Measurements. - in: JOM (2014) , S. 1638 - 1646

Stets, W.; Löblich, H.; Gassner, G.; Schumacher, P.: 
Solution Strengthened Ferritic Ductile Cast Iron Properties, Production and Application. - in:
International Journal of Metalcasting 2 (2014) 8, S. 35 - 40

1.

Ahmadein, M.; Wu, M.; Li, J.; Schumacher, P.; Ludwig, A.: 
Prediction of the as-cast structure of A-4.0 wt.% Cu ingots. - in: Metallurgical and materials transactions A (2013) , S. 1 - 1

2.

Petkov, T.; Künstner, D.; Pabel, T.; Faerber, K.; Kneißl, C.; Schumacher, P.: 
Erweiterung des Eigenschaftspotentials der Legierung Al Mg5Si2Mn durch eine gezielte Wärmebehandlung. - in: Berg- und hüttenmännische Monatshefte : BHM 158 (2013) 3, S. 104 - 112

3.

Li, J.; Schumacher, P.: 
Effect of Y addition and cooling rate on refinement of eutectic Si in Al-5 wt-%Si alloys. - in: International journal of cast metals research (2013) 10, S. 1 - 1

4.

Li, J.; Suetsugu, S.; Tsunekawa, Y.; Schumacher, P.: 
Refinement of eutectic Si phase in Al–5Si alloys with Yb addition. - in: Metallurgical and materials transactions A (2013) , S. 1 - 1

5.

Pabel, T.; Kneißl, C.; Schumacher, P.; Faerber, K.; Bozorgi, S.: 
Hot cracking susceptibility of AlSi7MgCu alloys. - in: --Fachzeitschrift in Liste nicht gefunden-- bitte den Zeitschriftentitel im Feld: weitere Angaben eingeben 5 (2013) 1, S. 4 - 5

6.

Pabel, T.; Bozorgi, S.; Kneißl, C.; Faerber, K.; Schumacher, P.: 
Vliv legujicich prvk? na slévárenskych slitin AlSi7MgCu ke vzniku trhlin za tepla. - in: Slévárenství (2013) 7-8, S. 263 - 270

7.

Petkov, T.; Künstner, D.; Pabel, T.; Faerber, K.; Kneißl, C.; Schumacher, P.: 
Werkstoffe in der Fertigung. - in: Werkstoffe in der Fertigung (2013) 6, S. 39 - 42

8.

Pabel, T.; Bozorgi, S.; Kneißl, C.; Faerber, K.; Schumacher, P.: 
Hot cracking susceptibility of AlSi7MgCu alloys and effects of alloying elements magnesium and copper. - in: China Foundry 10 (2013) 4, S. 69 - 74

9.

Petkov, T.; Künstner, D.; Pabel, T.; Kneißl, C.; Faerber, K.; Schumacher, P.: 
Determination of heat treatment parameters for an AlMgSi casting alloy. - in: Casting plant and technology international (2013) 2, S. 10 - 17

10.

Schumacher, P.: 
The microstructure of melt-spun Al-5Ti-1B-1Re master alloy and its refining efficiency on as-cast A356 alloys. - in: Journal of alloys and compounds D (2013) 03707 , S. 1 - 1

11.

Pabel, T.; Bozorgi, S.; Kneißl, C.; Faerber, K.; Schumacher, P.: 
Hot cracking susceptibility of AlSi7MgCu alloys and effects of alloying elements magnesium and copper. - in: China Foundry 4 (2013) 10 A, S. 248 - 254

 

1.

Janusz, L.; Pawel L., Z.; Shirzadi, A. A.; Greer, A. L.; Krajewski, W. K.; Suchy, J. S.; Faerber, K.; Schumacher, P.: 
Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: Modelling and experiment. - in: Acta materialia (2012) 60 , S. 2950 - 2958

2.

Petkov, T.; Künstner, D.; Pabel, T.; Faerber, K.; Kneißl, C.; Schumacher, P.: 
Optimierung der Wärmebehandlung einer AlMgSi-Gusslegierung. - in: Gießerei-Praxis (Giessereipraxis) (2012) 6, S. 268 - 274

3.

Li, J.; Sha, G. .; Wang, T. .; Jie, W. .; Ringer, S.: 
Precipitation microstructure and age-hardening response of an Mg-Gd-Nd-Zn-Zr alloy. - in: Materials science and engineering A (Structural materials: properties, microstructure and processing ) 534 (2012) , S. 1 - 6

4.

Li, J.; Zarif, M. Z.; Dehm, G.; Schumacher, P.: 
Influence of impurity elements on the nucleation and growth of Si in high purity melt-spun Al-Si-based alloys. - in: Philosophical magazine iFirst (2012) , S. 1 - 17

5.

Wimmer, A. C.; Li, J.; Schumacher, P.: 
Phase Selection in 6082 Al-Mg-Si Alloys. - in: Berg- und hüttenmännische Monatshefte : BHM (2012) 8-9, S. 301 - 305

6.

Li, J.; Sha, G. .; Jie, W. .; Ringer, S.: 
Precipitation microstructure and their strengthening effects of an Mg-2.8Nd-0.6Zn-0.4Zr alloy with a 0.2 wt. % Y addition . - in: Materials science and engineering A (Structural materials: properties, microstructure and processing ) 538 (2012) , S. 272 - 280

7.

Pabel, T.; Bozorgi, S.; Kneißl, C.; Faerber, K.; Schumacher, P.: 
Susceptibilitatea fisur?rii la cald a aliajelor AlSi7MgCu ?i influen?a elementelor de aliere (Magneziu ?i Cupru). - in: - 9-10, S. 2 - 11

1.

Hofer, P.; Kaschnitz, E.; Schumacher, P.: Simulation von Verzug und Eigenspannung im Druckguss – ein Vergleich zwischen Simulation und Experiment. Gießerei 98 (2011), Heft 03, S. 16-21

2.

Pabel, T.; Bozorgi, S.; Kneißl, C.; Haberl, K.; Schumacher, P.: Änderung der Warmrissneigung bei AlSi7MgCu-Legierungen in Abhängigkeit vom Kupfer- und Magnesiumgehalt. International Aluminium, Journal 3 (2011), S. 61-65

3.

Pabel, T.; Bozorgi, S.; Kneißl, C.; Haberl, K.; Schumacher, P.: Einfluss des Kupfer- und Magnesiumgehaltes auf die Warmrissempfindlichkeit von AlSi7MgCu-Gusslegierungen. Gießerei-Rundschau 58 (2011), Heft 3/4, S. 50-56

4.

Krajewski, W.; Buras, J.; Piwowarski, G.; Haberl, K.; Tsivoulas, D.: DSC and TA characteristics of the inoculated Al-Zn20 alloy- in: Archives of Foundry Engineering (AFE ; quarterly) Vol. 11 (2011) Issue 1, S. 65 - 68

5.

Zarif M.; McKay B.; Schumacher P.: Study of heterogeneous nucleation of eutectic Si in high-purity Al-Si alloys with Sr addition. Metallurgical and Materials Transactions A. DOI: 10.1007/s11661-010-0553-3

6.

Li J.H.; Zhang L.; Eskin D.; Schumacher P.: Effect of ultrasonic treatment on the grain refiner potency of Al-Ti-B rods in Al-Cu alloys. European Conference on Aluminium Alloys - ECAA, 5-7 October 2011, Bremen, Germany

7.

Li J.H.; Schumacher P.: Solidification and age hardening behaviour of Mg-Zn-Gd Alloys. 3rd International conference of advanced solidification process (ICASP III), 7-10 June 2011, Aachen, Germany

8.

Wu M.; Nunner G.; Ludwig A.; Li J.H.; Schumacher P.: Evaluation of a mixed columnar-equiaxed solidification model with laboratory castings. 3rd International conference of advanced solidification process (ICASP III), 7-10 June 2011, Aachen, Germany

9.

Schumacher P.; Zarif M.; Li J.H.: Grundlagenuntersuchungen zur Veredelung von Al-Si Legierungen. in: 55. Österreichische Gießerei-Tagung 2011. Montanuniversität Leoben am: 14-15.04.2011

10.

Li J.H.; Sha G.; Schumacher P.; Ringer S. P.: Precipitation process in Mg-Nd-Zn-Zr-Gd/Y alloy. TMS 2011 Annual Meeting & Exhibition. 2011, February 27-March 3, San Diego, California

11.

Bozorgi, S.; Haberl, K.; Kneißl, C.; Pabel, T.; Schumacher, P.: Effect of Alloying Elements (Magnesium and Copper) on Hot Cracking Susceptibility of AlSi7MgCu-Alloys. - in: 2011 TMS Annual Meeting & Exhibition. San Diego am: 01.03.2011

12.

Li J.H.; McKay B.; Klösch G.; Pabel Th.; Schumacher P.: Metallurgische Aspekte bei der Entwicklung von Mg-Legierungen. DGM-Fachausschuss Magnesium am 17.2.2011 in Geesthacht, Germany.

13.

Staggl, S.; Bozorgi, S.; Pabel, T.; Haberl, K.; Kneißl, C.; Schumacher, P.: Warmrissempfindlichkeit von Aluminium-Gusslegierungen. - in: 18. Internationaler Studententag der Metallugie; 2011 (2011), S. 178 - 186

1.
Pabel, T.; Bozorgi, S.; Kneißl, C.; Haberl, K.; Schumacher, P.: Einfluss von Kupfer und Magnesiumgehalt auf die Warmrissneigung bei AlSi7MgCu-Legierungen. Gießerei-Praxis 12/2010, S. 388-3942.
Haberl, K.; Schumacher, P.; Stauder, B.: Schmelzequalität von Al-Legierungen - Charakterisierung als Basis für Verbesserungen. - in: Berg- und hüttenmännische Monatshefte: BHM (2010) 11/2010, S. 493 - 49

3.
Zarif M.; McKay B.; Li J.H.; Schumacher P.: TEM investigation of a novel Fe containing phase in high purity Al-Si-Fe alloy. Berg- und hüttenmännische Monatshefte: BHM (2010) 155(11), S. 499 – 505

4.
Li J.H.; Zarif M.; Schumacher P.: Study of the effect of Strontium on the nucleation of eutectic Silicon in high purity hypoeutectic Al-5Si alloys. Berg- und hüttenmännische Monatshefte: BHM (2010) 155(11), S. 506 – 511

5.Bozorgi S.; Schumacher P.; Eder C.: Untersuchung der Legierung THX 540 (AlMg5Si2Mn) in Abhängigkeit von Abhängigkeit von verwendeten Thixoparametern.- in: Berg- und hüttenmännische Monatshefte: BHM (2010) 155(11), S. 512 – 5176.Hofer, P.; Kaschnitz, E.; Schumacher, P.: Simulation von Verzug und Eigenspannung im Druckguss – ein Vergleich zwischen Simulation und Experiment. Gießerei-Rundschau 57 (2010), Heft 9/10, S. 182-1867.Rosc, J.; Geier, G.; Habe, D.; Pabel, T.; Schumacher, P.: Methode für die Bewertung von Porositätsanalysen von CT-Daten. Proceedings – Industrielle Computertomographie – Fachtagung, 27.09.-29.09.2010, FH OÖ, Campus Wels, S. 85-918.Rosc, J.; Habe, D.; Pabel, T.; Schumacher, P.: Methode für die Bewertung von Porositätsanalysen von CT-Daten. Gießerei-Rundschau 57 (2010), Heft 11/12, S. 242-244

9.
Haberl, K.; Schumacher, P.; Geier, G.; Stauder, B.: Charakterisierung der Schmelzequalität einer AlSi7Mg0,5(Cu, Fe)-Legierung (Typ LM25). Gießerei-Rundschau (2010) 7/8, S. 131-136

10.Krajewski, W.; Buras, J.; Haberl, K.; Schumacher, P.: Development of environmentally friendly cast alloys and composites, high zinc Al-base cast alloys. Archives of Foundry Engineering, Volume 10 (2010), S. 431-43411.Krajewski, W.; Buras, J.; Haberl, K.: PROPERTIES VS. FINENESS OF STRUCTURE OF SAND CAST AI-Zn20 ALLOY, Technolog (2010) April, S. 123 - 126

12.
Lelito, J.; Zak, P.; Suchy, J.; Krajewski, W.; Krawiec, H.; Greer, L.; Shirzadi, A.; Schumacher, P.; Haberl, K.; Darlak, P.: Modelling the effect of SiC mass fraction on crystallization of magnesium metal matrix composite, AZ91/SiC. Inzynieria Materialowa, (2010) 3, S. 703-707

13.Zak, P.; Lelito, J.; Suchy, J.; Krajewski, W.; Krawiec, H.; Haberl, K.; Schumacher, P.; Greer, L.; Shirzadi, A.; Gracz, B.: Modelling the effect of SiC particle size on crystallization of magnesium metal matrix composite, AZ91/SiC. Inzynieria Materialowa, (2010), S. 699-702

14.
Kneißl, Ch.; Pabel, T.; Dambauer, G.; Schumacher, P.: Formenkonzept und Ergebnisse gießtechnologischer Versuche zur Entwicklung neuer Aluminiumlegierungen. Druckguss Praxis 4/2010, S. 85-90

15.Geier, G.; Fritz, L.; Hadwiger, M.; Rosc, J.; Pabel, T.; Pittino, G.; Schumacher, P.: Analysis and Exploration of CT-Data using application specific Multi-Dimensional Transfer Functions. Conference Papers, 10th European Conference on non destructive testing, 2010, Moskau, Russland, S. 1-1316.Pabel, T., Geier, G.; Habe, D.; Rosc, J.; Schumacher, P.; Petkov, T.: Correlation of Porosity Detected by Computed Tomography and Fatigue Strength of Aluminium Alloys. Conference Papers, 10th European Conference on non destructive testing, 2010, Moskau, Russland, S. 1-2

17.
Pabel, T.; Dambauer, G.; Schumacher, P.: Möglichkeiten einer modifizierten Wärmebehandlung für untereutektische Aluminium-Silizium Legierungen. Der Wärmebehandlungsmarkt, (17) 4/2010, S. 5-9

18.Geier, G.; Bauer, W.; Schumacher, P.: Vergleich der Graphitmodifikation – Gusseisen mit Vermiculargraphit durch Magnesium, Cer oder Lanthan. Gießerei-Praxis 1-2/2010, S. 10-15

19.
Geier, G.; Fritz, L.; Hadwiger, M.; Rosc, J.; Pabel, T.; Habe, D.; Pittino, G.; Schumacher, P.: Analysis and Exploration of CT-Data using application specific Multi-Dimensional Transfer Functions. Vortrag: 10th European Conference on non destructive testing, 2010, Moskau, Russland

20.Bozorgi, S.; Pabel, T.; Kneißl, C.; Haberl, K.; Schumacher, P.: Warmrisseigenschaften von AlSi7MgCu-Legierungen in Abhängigkeit von Mg- und Cu-Gehalt, Absolventen- und Doktorandenseminar der Gießereitechnik. am: 01.12.201021.Schumacher, P.; Pabel, T.; Rockenschaub, H.; Kaschnitz, E.; Geier, G.; Bozorgi, S.; Dambauer, G.: Neue Konzepte zur Entwicklung hochfester Aluminium Gusslegierungen. Vortrag: Aalener Gießerei-Kolloquium, 5.5. bis 6.5.2010, Aalen, Deutschland

22.
Bozorgi, S.; Pabel, T.; Kneißl, Ch.; Schumacher, P.: Einfluss von Kupfer- und Magnesiumgehalt auf die Warmrissneigung bei AlSi7MgCu Legierungen. Vortrag: 54. Österreichische Gießereitagung, 22.4. bis 23.4.2010, Leoben, Österreich

23.
Schumacher, P.; Dambauer, G.; Pabel, T.: Optimierung der Wärmebehandlungsparameter der Legierung EN AC-Al Si7Mg0,x. Poster: Posteraustellung am Lehrstuhl für Gießereikunde im Rahmen der 54. Österreichischen Gießereitagung, 22.-23.04.2010, Leoben, Österreich

24.
Rosc, J.; Habe, D.; Geier, G.; Pabel. T.; Schumacher P.: Zerstörungsfreie Werkstoffprüfung rund um’s Gussteil – Möglichkeiten und Fortschritte am ÖGI. Vortrag: 54. Österreichische Gießereitagung, 22.4. bis 23.4.2010, Leoben, Österreich

25.
Haberl, K.; Schumacher, P.; Geier, G.; Stauder, B.: Charakterisierung der Schmelzequalität einer AlSi7MgCu-Legierung (Typ LM25). Vortrag: 54. Österreichische Gießereitagung, 22.4. bis 23.4.2010, Leoben, Österreich

26.
Wenzl, B.; Schumacher, P.; Geier, G.: Computertomographie. Posteraustellung: 54. Österreichische Gießereitagung, 22.4. bis 23.4.2010, Leoben, Österreich

27.
Rosc, J.; Geier, G.; Pabel, T.; Habe, D.; Schumacher, P.: Gefügeuntersuchungen von metallischen Proben mittels Computertomographie. Posteraustellung: 54. Österreichische Gießereitagung, 22.4. bis 23.4.2010, Leoben, Österreich

28.
Haberl, K.: Development of environmentally friendly cast alloys and composites, high zinc Al-base cast alloys, Poster in: Marie Curie Conference. Turin, Italian am: 01.07.2010

29.
Pabel, T., Geier, G.; Habe, D.; Rosc, J.; Schumacher, P.: Correlation of Porosity Detected by Computed Tomography and Fatigue Strength of Aluminium Alloys. Poster in: 10th European Conference on non destructive testing, 7.6. bis 11.6.2010, Moskau, Russland

30.
Haberl, K.: Schmelzequalität, Poster in: 54. Österreichische Gießerei-Tagung 2010. Montanuniversität Leoben am: 22.04.2010

1.
Geier, G.; Bauer, W.; Schumacher, P.: Gusseisen mit Vermiculargraphit: Modifikationsverhalten von Mg, Ce und La bei unterschiedlichen Impfzuständen. Gießerei-Rundschau 56 (2009), Heft 11/12, S. 201-205

 

 

2.
Kneißl, Ch.; Pabel, T.; Dambauer, G.; Schumacher, P.: Entwicklung eines Kokillensets zur Bestimmung technologischer Eigenschaften von Al-Legierungen im Niederdruckkokillenguss. Gießerpraxis 10/2009, S. 320-324

3.Dambauer, G.; Pabel, T.; Schumacher, P.: Wärmebehandlungsparameter. Giesserei-Praxis (2009) 11/12, S. 201-205

4.
Haberl, K.; Schumacher, P.; Geier, G.; Stauder, B.: Characterization of the Melt Quality and Impurity Content of an Lm25 Alloy. Metallurgical and Materials Transactions B 40B (2009), S. 812-821

5.
Haberl, K.; Schumacher, P.; Geier, G.; Stauder, B.: Characterization of the melt quality and impurity content of an LM25 alloy. Shape casting: Third International Symposium, TMS 2009 (2009), S. 181-188

6.
Geier, G.; Rosc, J.; Hadwiger, M.; Fritz, L.; Habe, D.; Pabel, T.; Schumacher, P.: Assessing Casting Quality using Computed Tomography with advanced Visualization Techniques. Shape Casting 3rd International Symposium 2009, San Francisco, California, USA, 15.02.-19.02.2009. S. 131-139

7.
Schumacher, P.; McKay, B.; Eck, S.; Ludwig, A.: 2nd International Conference on Advances in Solidification Processes ICASP-2, 17-20 June 2008, Seggau Castle, Graz, Österreich, International journal of cast metals research 22 (2009), S. 1-1

8.
Dambauer, G.; Pabel, T.; Schumacher, P.; Einsparpotentiale durch eine modifizierte Wärmebehandlung für untereutektische Aluminium-Silizium Legierungen. Gießerei Praxis, 9/2009, S. 294-300

9.
Kneißl, Ch.; Pabel, T.; Dambauer, G.; Schumacher, P.: Formenkonzept und Ergebnisse gießtechnologischer Versuche zur Legierungsentwicklung im Niederdruckkokillenguss. Gießereirundschau 56, 7/09, S. 120-125

10.
Schumacher, P.; Pabel, T.; Rockenschaub, H.; Kaschnitz, E.; Hofer, P.; Geier, G.; McKay, B.J.; Bozorgi, S.; Dambauer, G.: Legierungsentwicklung für Leichtbau mit Guss. Vortrag: Tagung Leichtbau in Guss, 6.10. bis 7.10.2009, Augsburg, Deutschland

11.Schumacher, P.; Klösch, G.; McKay, B.J.; Pabel, T.: Control of nucleation phenomena in cast alloys. Vortrag: 49th Foundry Conference, 09.09.2009, Portoroz, Slowenien

12.
Schumacher, P.; Pabel, T.; Rockenschaub, H.; Kaschnitz, E.; Hofer, P.; Geier, G.: Design of aluminium alloys: Nano-scale vs. Macro-scale. Vortrag: AGH Oil Gas Conference, 9.7.2009, Krakow, Polen

13.
Schumacher, P.; Pabel, T.; Rockenschaub, H.; Kaschnitz, E.; Hofer, P.; Geier, G.: Aspects of modern casting engineering. Vortrag: Polish Foundry Research Institute, 8.7.2009, Krakow, Polen

14.
Rosc, J.; Geier, G.; Hadwiger, M.; Fritz, L.; Habe, D.; Pabel, T.; Schindelbacher, G.; Schumacher, P.: Assessing Casting Quality using Computed Tomography with advanced Visualization Techniques. Vortrag: World Technical Forum. 2.6.2009, Brno, Tschechien

15.
Geier, G.; Bauer W.; Schumacher, P.: Gusseisen mit Vermiculargraphit: Modifikationsverhalten von Mg, Ce, La und Y bei unterschiedlichen Impfzuständen. Vortrag: 53. Österreichische Gießereitagung, 23.4. bis 24.4.2009, Congress Salzburg, Salzburg

16.
Geier, G.; Rosc.; J.; Hadwiger, M.; Fritz, L.; Habe, D.; Pabel, T.; Schumacher, P.: Assessing Casting Quality using Computed Tomography with advanced Visualization Techniques. Vortrag: 138. TMS Tagung, 15.2. bis 19.2.2009, San Francisco, California, USA

17.
Haberl, K.; Schumacher, P.; Geier, G.; Stauder, B.: Characterization of the melt quality and impurity content of an LM25 alloy. Vortrag: TMS 2009 138th Annual Meeting and Exhibition, 15.2. bis 19.2.2009, San Francisco, California, USA

18.
Schumacher, P.; McKay, B.J.; Geier, G.; Haberl, K.; Hofer, P.; Klösch, G.; Nunner, G.; Pabel, T.; Zarif, Z.: Aspects of industrial nucleation. Vortrag: European certification meeting, 22.1. bis 23.1.2009, Nancy, Frankreich

19.
Schumacher, P.; McKay, B.; Nunner, G.; Geier, G. F.; Klösch, G.; Zarif, Z.; Haberl, K.; Hofer, P.; Pabel, T.: Aspects of industrial nucleation. - in: European certification meeting. Nancy am: 22.01.2009

20.
Haberl, K.: Schmelzequalität einer Al-Legierung, Poster in: WerWasWo.Forschung@MUL.2009, Leoben am: 02.11.2009

1.
Haberl, K.; Geier, G.; Schumacher, P.: Die Eignung des Unterdruckdichtetests zur Bestimmung der Schmelzereinheit von Aluminiumlegierungen. Giesserei 95, 10/2008, S. 48-542.
Haberl, K.; Geier, G.; Schumacher, P.: Die Eignung des Unterdruckdichtetests zur Bestimmung der Schmelzereinheit von Aluminiumlegierungen. Giesserei-Rundschau 55 (2008), Heft 5/6, S. 100-104

 

 

3.
Bozorgi, S.; Schumacher, P.; Eder, C.: Gefügeuntersuchung der Legierung THX 540 (AlMg5Si2Mn) in thixotropen Bauteilen . - in: Doktorandenseminar der Gießereitechnik. am: 01.12.2008. Aachen am: 01.12.2008

4.
Schumacher, P.: Trends in der Gießereitechnik für Powertrain Anwendungen. Vortrag: ASMET-Workshop Powertrain, Leoben, Österreich, 6.11.2008.

5.
Schumacher, P.: Technische Herausforderungen für ein nachhaltiges Wirtschaften in Gießereien. Vortrag: Vortragskolloquium zur Einweihung des neuen Gießereitechnikums der ASK, Hilden, Deutschland, 31.10.2008

6.
Haberl, K.; Geier G.; Schumacher, P.: Nucleation control of gas pores in Al alloys? Vortrag: Doktoratsseminar, AGH-Krakau, 23.9.2008, Krakau, Polen

7.
Schumacher, P.: Modern aspects of grain refinement in light alloys. Vortrag: Doktoratsseminar AGH Krakau, Krakau, Polen, 23.9.2008

8.
Schumacher, P.: Research activities at chair of casting research 2008. Vortrag: Marie Curie EU-Fellowship, Cambridge, Great Britain, 16.7.2008

9.
McKay, B.; Nunner, G.; Geier, G.; Schumacher, P.: Impurities in Al-Ti-B grain refiner rod. International conference on advanced solidification processing II. Vortrag: Seggau, Österreich, 17.6.2008

10.
Schumacher, P.; Klösch, G.; McKay, B.: Preliminary investigation on the grain refinement behaviour of ZrB2 particles in Mg-Al alloys. Vortrag: International conference on advanced solidification processing II, Seggau, Österreich, 17.6.2008

11.
Kamran, M.; McKay, B.; Schumacher, P.: Cooling slope for semi-solid processing. Vortrag: International conference on advanced solidification processing II, Seggau, Österreich, 17.6.2008

12.
Schumacher, P.: Trends in modern casting engineering. Vortrag: Metallforum, Poznan International Fair, Poznan, Polen, 10.6.2008

13.
Haberl, K. Geier, G.; Schumacher, P.: Die Eignung des Unterdruckdichtetests zur Bestimmung der Schmelzereinheit von Al. Vortrag: VDG-Gießereitagung, 16.4.2008, Aachen Deutschland

14.
Schumacher P.: Grain refinement mechanism. Vortrag: TMS Annual Meeting, New Orleans, Louisiana, USA, 9.3.2008

15.
Schumacher, P.: Fundamentals of solifidication. Vortrag: TMS Annual Meeting, New Orleans, Louisiana, USA, 9.3.2008

1.
Klösch, G.; McKay, B.; Schumacher, P.: Preliminary investigation on the grain refinement behavior of ZrB2 particles in Mg-Al alloys. Collected proceedings - light metals, TMS 2007 (2007), S. 69-75

2.
Rockenschaub, H.; Pabel, T.; Schumacher, P.; Sigmund, A.; Wohlmuth, P.: Schmelzen von Magnesium-Optimierung der Strömungsverhältnisse in einem Magnesiumofen. DieCasting Technical Reports, 09/2007

3.
Geier, G.; Kaschnitz, E.; Pabel, T.; Schindelbacher, G.; Schumacher, P.: Comparison of results of numerical simulations of castings with x-ray computed tomography reconstructions. Posterpräsentation: Technical Forum World Foundry Organisation, 2007, Düsseldorf, Deutschland

4.
Geier, G.; Bauer, W.; Schumacher, P.: CGI: Modification Behaviour of Mg, Ce, La, Y at Different Modification States. Vortrag: 4th International Foundry Technical Forum, 26.9.2007, Bilbao, Spanien

1.
Klösch, G.; McKay, B.J.; Schumacher, P.: Untersuchung zum Kornfeinungsverhalten von ZrB2-Partikeln in Magnesium-Aluminium-Legierungen, Giesserei-Rundschau 53 (2006) Heft 3/4, S. 58-622.
Dambauer, G.; Pabel, Th.; Schumacher, P.: Optimierung der Wärmebehandlungsparameter der Legierung EN AC-AlSi7Mg0,x., Giesserei-Rundschau 53 (2006) Heft 3/4, S. 50-563.
Schumacher, P.: Microstructural control by grain refinement, Livarski Vestnik 53/2006, Nr. 1, S. 2-184.
Lichtenberger, A.; Geier, G.; Weber, S.-U.; Schifferl, H.A.; Schumacher, P.; Kolb, G.; Lottermoser, W.; Amthauer, G.: 57-Fe Mössbauer spectroscopy on cementite Fe3C of steel and nanotube origin – a comparison. Posterpräsentation im Rahmen der 84. Jahrestagung des DMG, Universität Hannover, 25. bis 27.09.20065.
Geier, G.; Kaschnitz, E.; Pabel, T.; Schindelbacher, G.; Schumacher, P.: Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions. 9th European Conference on non-destructive Testing – ECNDT, Berlin, 25.9. bis 29.9.20066.
Geier, G.; Kaschnitz, E.; Pabel, T.; Schindelbacher, G.; Schumacher, P.: Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions. Vortrag: 9th European Conference on non-destructive Testing – ECNDT, Berlin, 25.9. bis 29.9.2006.7.
Geier, G.; Kaschnitz, E.; Pabel, T.; Schindelbacher G.; Schumacher, P.: Comparison of results of numerical simulations of castings with x-ray computed tomography reconstructions. Posterpräsentation: 9th European Conference on non-destructive Testing – ECNDT, Berlin, 25.9. bis 29.9.2006.8.
Schumacher, P.; Pabel, T.; Rockenschaub, H.; Kaschnitz, E.; Hofer, P.; Geier, G.: Aspects of modern casting engineering. Vortrag: 46th Foundry Conference, 14.9.2006, Portoroz, Slovenia9.
Schumacher, P.; Pabel, T.; Rockenschaub, H.; Kaschnitz, E.; Geier, G.: Aspects of modern casting engineering. International 46. Foundry Conference Portoroz 2006, Conference Proceedings10.
Schumacher, P.: Grain Refinement of Light Metals. Vortrag: 7. Intern. Gießereitagung in Opatja/Kroatien am 11./13.6.2006.11.
Franke, A.; Lenczowski, B.: Pabel, Th.; Schumacher, P.: Konzepte zur Entwicklung hochfester Aluminium-Gusslegierungen. Vortrag (Vortragende: Franke Annegret): 50. Österr. Gießereitagung am 27./28.4.2006 in Leoben.12.
Dambauer, G.; Dambauer, A.: Pabel, Th.; Schumacher, P.: Wärmebehandlung von Kokillengussbauteilen der Legierungsgruppe AlSiMg. Vortrag (Vortragender: Dambauer Georg): 50. Österr. Gießereitagung am 27./28.4.2006 in Leoben.13.
Willidal, Th.; Geier, G.; Bauer, W.; Schumacher, P.: Vom Lamellen- zum Vermiculargraphit: Morphologie und mechanische Eigenschaften im Übergangsbereich. Vortrag (Vortragender: Willidal Thomas): 50. Österr. Gießereitagung am 27./28.4.2006 in Leoben.14.
Klösch, G.; McKay, B.J.; Schumacher, P.: Kornfeinung von Magnesium-Legierungen. Vortrag: Deutscher Gießereitag 2006. 3.4. und 4.4.2006 in Bremen.15.
Schumacher, P.: Aspects of Nucleation Mechanisms on the CET in Al Alloys. Eingeladener Vortrag: TMS 2006, San Antonio/USA. 11.3. bis 17.3.2006.16.
Klösch, G.; McKay, B.J.; Schumacher, P.: Preliminary Investigation on the Formation and Grain Refinement of Particles in Mg-Al Alloys. Vortrag: (Vortragender: Schumacher): TMS 2006, San Antonio/USA. 11.3. bis 17.3.2006. Tagungsband TMS 2006.

1.
Bittner, G.; Kniewallner, L.; Menk, W.; Schumacher,P.: Dünnwandige Strukturteile für den Fahrzeugbau. Giessereikompakt 01/2005, S. 23-272.
Willidal, Th.; Bauer, W.; Schumacher, P.: Stress/Strain Behaviour and Fatigue Limit of Grey Cast Iron, Materials Science & Engineering A 413-414 (2005) S. 578-582.3.
Geier, G.F.; Bauer, W.; McKay, B.J.; Schumacher, P.: Microstructure transition from lamellar to compacted graphite using different modification agents. Materials Science & Engineering A 413-414 (2005) S. 339-345.4.
Schumacher, P.: Prozess- und Werkstoffoptimierung von Leichtmetallgusslegierungen. Vortrag: Schlüsseltechnologie Leichtmetallguss im Automobilbau, Bad Nauheim/Frankfurt, Deutschland, 17.11.20055.
Schumacher, P.: Grain Refinement of Mg-Al Alloys with Zr Addition. Posterpräsentation: Continuous Casting of Non-ferrous Metals. Neu-Ulm, Deutschland, 14.11.20056.
Schumacher, P.: Microstructural control by grain refinement, Vortrag: (Vortragender: Schumacher): 45. Gießereitagung in Portoroz, 15.9.2005. Livarski Vestnik 53/2006, Nr. 1, S. 2-187.
McKay, B.; Schumacher, P.: The Role of Heterogeneous Boride Particles in the Grain Refinement of Al Alloys. Vortrag: (Vortragender: Schumacher): Intern. Conference on Advances in Solidification Processes, Stockholm/Schweden, 7.-10.6.2005. Präsentation von 2 Poster.8.
Geier, G.; Bauer, W.; McKay, B.J.; Schumacher, P.: Microstructure transistion from lamellar to compacted graphite using different modification agents. Vortrag: International Conference on Advances in Solidification Processes, 7.6. bis 10.6.2005, Stockholm, Schweden9.
Schumacher, P.: Gussteile unter der Motorhaube. Vortrag: (Vortragender: Schumacher): HTBLA, Kapfenberg, 30.5.200510.
Schumacher, P.: Einfluss von Seigerungen auf die Kornfeinung bei Al-Legierungen. Vortrag: (Vortragender: Schumacher): Österr. Gießereitagung 2005, Innsbruck, 21.-22.4.05. Präsentation von 2 Poster.11.
Schumacher, P.: Al-Legierungen. Österreichische Gießereitagung, Innsbruck, Österreich, 21.04.200512.
Schumacher, P.: Kornfeinung. Österreichische Gießereitagung, Innsbruck, Österreich, 21.04.200513.
Geier, G.; Bauer, W.; Schumacher, P.: Graphite Modification by Ce, La and Mg. Vortrag: Meeting of WFO Commissions 7.1 and 7.4, 20. April 2005, Innsbruck, Österreich14.
Schumacher, P.: Applied R&D results for foundries and end-users of castings, Vortrag: (Vortragender: Schumacher): 1. Foundry Fair, Celje/Slowenien, 12.-15.4.05. Tagungsband15.
McKay, B.; Schumacher, P.: An Overview of Heterogeneous Nucleation Mechanisms in Al Alloys. Vortrag: (Vortragender: Schumacher): TMS2005, San Francisco, 12.-18.2.2005. Tagungsband TMS2005.

1.
Bittner, G.; Kniewallner, L.; Menk, W.; Schumacher,P.: Dünnwandige Strukturteile für den Fahrzeugbau, Giesserei 91 (2004) Nr. 10, S. 32-38.2.
Rockenschaub H., Pabel T., Romansky M., Schumacher P., Sigmund A., Wohlmuth P.: Beschleunigtes Aufschmelzen von Magnesium-Masseln durch optimierte Strömungsverhältnisse; Druckguss Praxis 01/04 (2004), S. 24 - 323.
Schumacher, P., Hummer, R.; Nechtelberger, E.: Die kontinuierliche Entwicklung des ÖGI zum Kompetenzzentrum für Gießereitechnik, Giesserei-Rundschau 51 (2004) Heft 5/6, S. 1074.
Ludwig, A.; Wu, M.; Schumacher, P.: Simulation von Transportphänomenen bei der Erstarrung von Gussteilen: Vorhersage von Makroseigerungen und Korngrößenverteilungen, Giesserei-Rundschau 51 (2004) Heft 11/12, S. 212-2185.
Buchkapitel: McKay B.J. and Schumacher, P.: "An Investigative Study of Si Poisoning in Al-Si Alloys Using the Metallic Glass Technique", in "Solidification of Aluminum Alloys" Hrsg. Men G. Chu; Douglas A. Granger; Qingyou Han. Copyright TMS - The Minerals, Metals, and Materials Society. 2004. S. 157-1666.
Buchreferierung: O'Reilly,K.; Warren,P.; P. Schumacher, P.; B.Cantor: Structural Materials: Properties, Microstructure and Processing: 11th International Conference on Rapidly Quenched and Metastable Materials; Materials Science and Engneering, 2004, 1320 Seiten7.
Vortrag (Vortragender: Schumacher): TMS 2004 in Charlotte/North Carolina, USA , (14.-18.3.2004).8.
Vortrag: (Vortragender: Schumacher): 48. Österreichische Gießereitagung in Leoben9.
Wurzer, G.; Geier, G.: Endbericht EU-Projekt "metallingua" (2004) für EU-Projektnehmer: BA & Co. Industrial and Service Ltd.,z.Hd. Herrn Dr.habil. PhD Karoly BAKO, Budapest, 19 Seiten

1.
A.L. Greer, P.S. Cooper, M.W. Meredith, W. Schneider, P. Schumacher, J.A. Spittle, A. Tronche. Grain Refinement of Aluminium Alloys by Inoculation. Advanced Engineering Materials 2003, 5, No. 1+2. S. 81-91.2.
Schumacher, P.; McKay, B.: TEM investigation of heterogeneous nucleation mechanisms in Al-Si alloys; Journal of Non-Crystalline Solids 317 (2003), S. 123-1283.
Schumacher, P.: Keimbildungsmechanismen während der Kornfeinung von Al-Si Legierungen. Giesserei-Rundschau 50 (2003) Heft 9/104.
Schumacher, P.: Nucleation mechanisms during grain refinement in Al-Si alloys. Vortrag: 43. Gießereitagung, Portoroz (18.-19.9.2003).Beitrag Tagungsband5.
Briceno-Gomez, M., Brown, P., Titchmarsh, J.M., Ahmed, S., Schumacher, P.: Microstructural characterisation of a rapidly solidified NiMo steel; Tagungsband EMAC 2003-Proceedings.6.
Schumacher, P.: Nucleation mechanisms during grain refinement in Al-Si alloys; Vortrag: 43. Gießereitagung, Portoroz (18.-19.9.2003); Livarski vestnik, letnik 51, Nr. 1/2004, S. 1-9.7.
Schumacher, P.: Casting Research at the University of Leoben and the Austrian Foundry Research ÖGI. Vortrag: Austrian/French Bilateral Seminar, Wien (27.3.2003).8.
McKay, B.J.; Schumacher, P.: The influence of Si on the heterogeneous nucleation mechanism in Al alloys.; Vortrag: (Vortragender: Schumacher) EUROMAT 2003 in Lausanne (1.-2.9.03); Beitrag Tagungsband9.
Schumacher, P.: R & D activities at the University of Leoben, Vortrag: 40. Gießereitagung, Brno/Tschechien (2. - 4.6.2003).10.
Schumacher, P.: Characterisation of NiMo Steels made by Rapid Solidification Routes; 1 Poster auf der EUROMAT 2003 in Lausanne (1.-5.9.2003)11.
Ippavitz, A.; Geier, G.; Wurzer, G.; Schumacher, P.: 2 Poster; Präsentation auf der GIFA, Düsseldorf (16.-21.6.03).12.
Schumacher, P.: Keimbildung in Al-Legierungen, Vortrag: Österr. Gießerei-Symposium, Salzburg (24.-25.4.2003), 1 Poster13.
Ippavitz, A.; Wurzer, G.; Geier, G.: METALLINGUA - The metallurgical dictionary on the web. 10. Intern. Studententag der Metallurgie. 3. - 5.4.2003, Vortrag: (Vortragender: Geier Georg), Tagungsband S. 39-40, 1 Poster